1: measure the inside width at the top of the window. This is your ordering width. We will make the necessary deductions.
2: Measure the height at three location - the left side, middle and right side. Record the largest of the three measurements.
This is your ordering length.
Note: Fabric will be approximately
1-¼” (5/8” on left side and 5/8” on right side) narrower than your ordering width to allow for brackets.
If concerned over resulting light gap please select outside mount.
1: Measure the width of the are you wish to cover. If space allows we recommend adding 1-¼” (5/8” on each
side) to this measurement to help eliminate light seepage. This is your ordering width and will be the overall measurement
outside bracket to outside bracket.
Step 2: Measure the height of the area you wish to
cover. This is your ordering length.
Note: Fabric will be approximately 1-¼”
(5/8” on left side and 5/8” on right side) narrower than your ordering width to allow for brackets. If you need
the fabric to cover a specific width (ie, for mounting a shade on a door) add 1-¼” to the width.
3. Left or right control position: Please select which side you want the control chain to be on.
either Regular or reverse roll for your shade.
On the regular roll the fabric falls off the back of the roll. On the
reverse roll the fabric falls off the front of the roll and provides a finished look when not adding a fascia. This option
is not available if you are ordering a fascia.